 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
package deal. These are our current in stock, heavy duty
.050" 4130 normalized receiver blanks for an even
stronger receiver. Includes a set of US made semi auto
lower bolt rails and a set of the assembly bolts.
Includes templates for AKM (AMD) and AK-74 front
trunnions, and template for AMD-65 rear trunnions.
Everything you need to build your receiver. Works for
7.62, 5.45, or 5.56 calibers. This is the blank for AKM
types- Romanians, Polish PKMS and Tantal's, AMD's,
AK-74's, Krinkovs, etc.
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
package deals: .050" Normalized 4130 alloy steel.
These have the bulges for the RPK/YUGO front
trunnion. Correct width for the RPK/Yugo
underfolders and rear trunnions also. SUPER
QUALITY! These will make all your Yugo kits
happy!
(2) AKM TYPE 80% Blanks w/Rails/Bolts
bonded template and 10 pages of instructions that cover all
needed operations for turning your blank into a working legal
rifle. NEW- Trunnion templates for AKM/AK-74 front
trunnions, and AMD-65 rear trunnion included. Available
with or without long hammer/trigger pins. Quantity discounts
available.
BASIC BLANKS!!!
PRIOR TO ORDERING
#1-Bonded Template showing required holes and
cutouts.
#2-10 pages of instructions that cover all operations
needed to build a working, legal AK rifle.
#3-Front trunnion hole templates for AK-74 and
AKM (AMD).
#4-AMD-65 rear trunnion hole template.
#5-Different Template for reference.
#6-Blueprint for making AK receiver.
#7- 38 page pamphlet w/ diagrams on making AK
receiver from flat steel pieces.
steel pieces into a working receiver, and assemble them into
a working AK. Seven different items consisting of
everything we have written on building an AK (items 1-4)
plus additional items we have collected. If you want to build
from scratch- you need this package.
US made Semi Auto style rails. Precision stamped from 4130
steel, top quality, Heavy duty .063 thickness on both rails.
Will work for all calibers. Instructions included. We can
heat treat to harden the ejector for you prior to shipment upon
request.
If you plan to screw together your AK, rather than rivet, this is
the set you want to use. Includes (8) 10-32 bolts for trunnions,
(2) 1/4-28 bolts for larger front trunnion hole near mag well,
(2) 10-32 bolts for (optional) center support, (5) 8-32 bolts
with special small size nuts for trigger guard/mag catch, and
(8) 6-32 bolts for attaching lower bolt rails.
The 1/4" bolts replace the swell neck rivet so you get
maximum threaded area versus using a 10-32. The 10-32 will
usually only get about half the hole threaded. The AK-47
typically has 2 swell neck rivets in front trunnion. The AK-74
typically has 4 swell neck rivets in front trunnion- contact me
if you need additional 1/4 inch bolts.
These bolts are hard to find in the thread sizes and lengths
needed.
3 Pages of instructions are included. Tapping of trunnions will
be required. (4) of the 10-32 bolts may need to be sanded to
length for front trunnion if you leave barrel in the trunnion. If
you dismount the barrel to do the tapping, they will be exact
length required.
BOLTS ARE FOR AN UNDERFOLDER AKM
TYPE, OR IF FOR A YUGO/ RPK TYPE. WE WILL
MODIFY THE PACKAGE FOR YOUR NEEDS.
These pins are slightly longer so that on all receivers up to
.050" they will actually stick slightly out the right side of the
receiver. Nice for all homebuilt rifles!
TRIGGER/HAMMER PINS.