 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
one of our 80% YUGO/ RPK Blanks:
"You seem to need a couple Yugo photos to go along with my
new order.
I cannot tell you how easy it was with your template.
I have screwed around with public template and ruined
three blanks...two AKM and one yugo..no more...
I look forward completing a Yuko RPK with my new
blank/template I just ordered from you."
"the paint is matte black duracoat that cured the
entire three weeks. Buy it off ebay, it is a little
bit cheaper. I used a crummy harbor freight airbrush
but it turned out ok. You can just tell the paint gets
harder with time. Spend a few dollars more and get a
paasche, badger or if you have a lot, an iwata
airbrush- there is a big difference with the
application.
I reblued the barrel with Blue Wonder. First time
using the stuff, and it worked pretty good. Work a
little bit at a time and use a small cotton bore patch
(like one half a 30 cal). Don't use cotton swabs,
tried that on some of the detail stuff and turned out
crappy, but you can take that off and twist a patch to
get into the cracks. Used about 1 oz for the barrel
job, then let it sit at least 24 hours before handling
it and rubbing off the developer.
The furniture is 5 coats of boiled linseed oil under
five coats of Tung oil, after stripping off the old
oil using a Watco furniture refinisher. The BLO is
great to seal all the small cracks in the wood, the
the tung just bring the grain out."
customer using our 80% AKM blanks. First we have an
AMD-65 (from back when we sold those kits!). Then a
nice AK-74 (I can't remember if we supplied this kit or
not.)
nifty modifications to AMD-65 and Romanian AKM kits that
we supplied. I think we may have supplied
receivers/blanks also, but can't be positive:
"I was at the range with the AMD I got from you and
modified to take the drum mag. It is a very nice rifle. I also
have a scope rail on this with a nice red dot and laser. It's
pretty awesome. Maybe you can include this in your web
site.
I also sent a picture of the first Romanian I got from you
that I put an AMD Stock on.
So far all three rifles I got from you are very nice."
seen. Customer used our 80% Yugo/RPK
Blank.
"I bought your 80% yugo receiver and I was
very happy with the quality and the information
provided with it. I took a Zastava kit and some
time at a machine shop and put this together. I
have another kit to put together so I will be
placing an order soon."
our 80% blank kits.
"By the way I thought I would attach a picture of the
Polish underfolder. Not too bad for the first time
around. Thanks again."
our 80% blank and one of the few post-ban type
kits we had.
"I received the kit today. Everything is as you
said, I'm pleased.
I've already started putting it together (see
photo).
By the way that's one of your 80% receivers."
customers. Top pistol is on one of our 80%
blanks. Bottom pistol is on an Ohio Ord 100%
receiver.
100% receiver, one of our Yugo kits, and our
compliance parts. These pictures are when it was
test fired just after being finished.
"Got the Yugo to the range , and it would only single
fire, found the front of the receiver had pulled together
by .020, causing the bolt carrier to bind up, I could
force it and fire it, but I took it home and buffed it a
little and went back to the range.
It cycled perfectly, I ran 200 rnds thru it, had to watch
that, only have 1000 for now! It shoot's damn accurate
too! pulled it down and it is perfect, no funky wear
pattern's , so all is good Over here! The DCI receiver
are awesome, as are the Ohio Ordiance, but I like the
blue color on the DCI.
Here are a few pics from the range , I can send better
one's if you want. Your screw kit,FCG,Receiver,922
compliance kit, a US made muzzle break ( I prefer the
stock grip's) and of course your yugo kit. Everything
but the muzzle break is from you"
